I was bored during quarantine, so I built a flamethrower out of items I found at home. Yes, the body is out of wood, and as fuel, it uses deo spray. Each full tank allows it to fire for around one minute at a time. It works like this. The fuel valve is controlled by a servo located behind the fuel tank. That servo can be initialized by a button located on the handle (Although it is not a direct connection - the signal goes through an Arduino). And for fuel ignition, there is a 3-100kV transformer on the side, which creates sparks and therefore lighting up the fuel (this circuit is separate from the Arduino for security reasons).It might seem dangerous, but as long as the fuel tank does not heat up, nothing can happen. I also built in a safety switch just in case something goes wrong. The fire can not reach the fuel tank from the inside due to the tube being too small and not containing enough oxygen. I am aware that editing is not permitted, but at the end of the clip, I added a short overview of the flamethrower itself in case you need it. If you need anything or have any questions, feel free to send me an email. Thank you.